Powerpoles (developed by Anderson Power Products) are a genderless connector system that provides a simple and low-cost solution to power interconnection.

Powerpole modular connectors are available in 10 to 180 amps maximum ratings for use through 600 Volts continuous, AC or DC operation. There are Powerpoles for every application and wire size, #20 AWG to 1/0 AWG.

The Powerpole® is a simple design that offers versatility and reliability in the ever changing and demanding requirements of the electrical connector arena.

The Powerpole® 10 amp and 30 amp pin and socket series connectors (Anderson Power Products), designed as ground terminals, are for 'make-first / break-last' connections.

The PP15/45 Powerpole® (Anderson Power Products) is available in 11 colours. The PP15/45 will accomodate wire sizes fram a #20 AWG (.52 mm) up to and including #10 AWG (5.26mm). The current rating is 15 amps to 45 amps, 600 Volts, AC or DC.

The PP75 Powerpole® (Anderson Power Products) is available in 5 standard colours, but can be moulded in additional colours upon request. The PP75 will accomodate wire sizes from a #6 AWG (13.30 mm) to and including #16 AWG (1.31 mm). Current ratings are up to 75 amps, 600 volts AC or DC.

The PP120 Powerpole® (Anderson Power Products) is available in 5 standard colours, but can be moulded in additional colours upon request. The PP120 will accommodate wire sizes from a #2 AWG (33.62 mm) to and including #8 AWG (8.37 mm). Contacts are silver-plated. Current ratings are up to 120 amps, 600 volts, AC or DC.

The PP180 Powerpole® (Anderson Power Products) is available in 5 standard colours, but can be moulded in additional colours upon request. The PP180 will accommodate wire sizes from a 1/0 AWG (53.50 mm) to and including #10 AWG (5.26 mm). Contacts are silver-plated. Current ratings are up to 180 amps, 600 volts, AC or DC.

Anderson Power Products'® printed circuit board (PCB) contact series, and the Powerpole® 15/45 connector housing, provide a reliable wire to printed circuit board connection. The connector system is rated at 25 amps, 600 volts, AC/DC. The contact is available in both straight and right angle terminations for perpendicular and parallel mount.

The Powerclaw® series of connectors (Anderson Power Products) is designed to meet the high power requirements of the communications and networking industry. The revolutionary three-claw attachment provides the contact surface area needed for high-current board-level power. The contact is tin/lead-plated to minimize contact resistance at high current and to ease soldering to the PCB.

In addition, Powerclaw's modular construction makes connecting and disconnecting a snap. The Powerclaw connectors allow a safe and convenient "hot swapping" when maintenance of the equipment is required.

Powerpole® Paks (Anderson Power Products) are high impact and corrosion-resistant black thermoplastic outer shells for containing our blocked 10 to 45 amp Powerpole® connectors.

They allow easy connection and disconnection of electrical equipment in commercial and industrial applications. Cable clamps provide strain relief and integral latches prevent accidental disconnection of your equipment. The three housings - Plug With Latch, Plug Without Latch, and Snap-In Receptacle - accommodate 2 to 8 circuits for orderly cable management systems and "clean-looking" appearances.

The Blindmate Powerpole® Pak (Anderson Power Products) was developed to meet the demand for modular Blindmate connections from the power and communications markets. These housings permit blindmating of a 2x4 configuration of Anderson's 15/45 Powerpole® connectors as well as both the 10 amp and 30 amp 'make-first / break-last' contacts for grounding purposes.

Anderson Power Products new line of power drawer series connectors gives our customers more selections than ever to meet their power connector needs. These cost effective, mixed power and signal drawer connectors are manufactured using the same high quality standards. The drawer series can be used for a wide range of drawer-type applications such as rectifiers, mainframe computers, telecommunications, and network equipment.

Anderson Power Products' Bus bar series of contacts are designed for attachment to copper Bus. They handle 75 amps to 180 amps and are used with standard APP connector housings. The Bus bar contacts replace terminals and lugs which had required an electriction to disconnect.