The SB 2-pole connector (Anderson Power Products) is available in 50, 175 and 350 amps ratings for use to 600 Volts AC or DC operation.

The SB 175 is also available in a 3-pole design.
A series of SB reducing bushings allows for easy adjustment to different cable diameters.

A complete line of accessories is available:
• Contacts - Reducing bushings
• 'A'-frame handles - Manual release
• Dust caps - Cable clamps
• Housings

The SBX 2-pole connector (Anderson Power Products) is available in 175 and 350 amps rating for use to 150 Volts continuous AC or DC operation.

A complete line of accessories is available:
• Contacts - Auxiliary Contacts - Reducing bushings
• Air adapters for electrolyte circulation system
• 'A'-frame handles - Manual release
• Dust caps - Cable clamps
• Housings
• Tools for removing contacts
• Charger Key

The SBE Connectors (Anderson Power Products) are a further development of the SBX Series. They comply to the standard EN 1175-Part 1. The SBE 2-pole connector is available in 80, 160 and 320 amps rating for use to 150 Volts continuous AC or DC operation.
NEW!!! SBE 700 = 700 Amps.
The SBE 160 is also available in 3-pole version.

A complete line of accessories is available:
• Contacts - Auxiliary Contacts - Reducing bushings
• Air adapters for electrolyte circulation system
• Handle for SBE 80 - 'A'-frame handles - Manual release
• Dust caps - Cable clamps
• Housings
• Tools for removing contacts
• Charger Key

The Anderson Power Products family of DIN connectors exceed the requirements of DIN 43589-1 and EN 1175-1 for the 80 amp, 160 amp and 320 amp connectors and incorporate the newest technical features for ease of assemly and use. The standard version comes with a cable clamp.
New version Euro DIN Connector !
Intermateable with all standard commercial charging connectors.

A complete line of accessories is available:
• Contacts - Auxiliary Contacts - Pilot Contacts - Reducing Bushings
• Handles
• Air adapters for electrolyte circulation system
• Coding Pins for dry and wet batteries
• 'Dinloc' Locking Plate

Rema connectors for electrically operated trucks, produced according to DIN 43589-1. Available as 80, 160, 320 amp and 320 amp connectors with 400 amp contacts. The standard version comes with a cable clamp. Optional with moulded-on handle.

A complete line of accessories is available:
• Contacts - Auxiliary Contacts - Pilot Contacts - Reducing Bushings
• Red or Black Removable Handles
• Air adapters for electrolyte circulation system
• Coding Pins for dry and wet batteries

The new LV Series charging connectors are especially designed to meet the demands of modern materials handling vehicles. They even exceed the requirements of standard EN 1175-1 in many of their features. There is an option for chargers with electrolyte circulation system. Like all LV Series connectors, also this option is intermateable with all standard commercial charging connectors. Available as 80, 160 and 320 amp connector.

Schaltbau LB-L Series: charging connector with integrated air passage, dimensions to DIN 43589 (part 1), approved to DIN EN 1175-1. Tested impact resistance, battery fluid-tightness. Available as 160 and 320 amp connector.

For the LV as well as for the LB-L Series, a complete line of accessories is available:
• Contacts - Auxiliary Contacts - Pilot Contacts - Reducing Bushings
• Red or Black Handles
• Air adapters for electrolyte circulation system
• Coding Pins for dry and wet batteries
• Contact removal tools

Jungheinrich-type twin plug and socket connectors for electrically operated trucks (developed by Rema).

• Service voltage max. 48V
• Housing made of polyamide

Connectors FT 80, in compliance with EN 1175-1 and RA 150 (developed by Rema).

• Service Voltage : 12, 24, 36, 48, 72, 80 V.
• The FT 80 A does not correspond to DIN Standard but it is in accordance with the Euro Standard.
• Only grey coding for wet batteries.
• Available accessories : Contacts - Auxiliary Contacts - Handle - Coding Pin - Housing